Pullout Truck Tarps

Our truck pull tarps are a semi-automatic pull tarp system. The tarp is housed in a 20cm x 20cm housing that is fitted to the front of the body and held at the rear with cleats.

The system is built made to measure and is available in 5 metre or 7 metre lengths. 

The system comes preassembled and can be fitted in less than half an hour. Operation is extremely easy, simply pull the rope and hook the tarp tube at the rear.

The tarp automatically retracts as the operator slowly releases the rope until the tarp is fully wound back into the housing.

We use the highest quality mesh tarp on the market, the "MIGHTY MESH" which comprises:

  • 400GSM mesh.

  • 10cm rear bar pocket with reinforced PVC for strength and durability

  • 4cm black PVC strips double stiched along the 4mm spline used to connect to the roller bar.

  • 5cm webbing clinched all along the perimeter.

  • Brass eyelets clinched every 600mm on both long sides

  • Double needle lock stitching across entire tarp.

Motor Vehicle Repairer's Licence (MVRL) 55294.

 

Everlast Tarps Pull Tarp

Adtrans Hino Everlast Tarps Pull Tarp